Effect of boehmite additive on the densification of mullite formation from sol-gel precursor

关键词：

mullite boehmite additives densification sol-gel

类别：

纤维 >> 合成纤维

来源：

ICAFPM 2011

资料类型：

pdf文件

资料大小：

1533K

简介：

Application of mullite was limited due to poor sintering ability, porosity and less dense. The addition of sintering aids is to improve microstructure, densification and performances of mullite. In this study, Mullite sol and boehmite sol were prepared by sol-gel method from an aqueous solution of aluminum nitrate (AN), aluminum isopropoxide (AIP) and tetraethylorthosilicate (TEOS), and boehmite was used as sintering aid to improve sintering ability of mullite. Dried and heated mullite sol added boehmite sol was characterized by DSC-TG, Fourier infrared spectroscopic, and density testing. More amorphous structure was formed which is conducive to densification for mullite, and density testing proved that. The boehmite content (5 wt%) yielded maximum density of 98% theoretical density (3.01 g/cm3).

上传人：

epce

上传时间：

2011-10-09 14:39:08

下载次数：

消耗积分：

我要收藏：

友情提示：下载后对该资源进行评论，即可奖励2分。

好：
中：
差：

本栏目部分资源来自互联网，仅为促进数据共享和信息交流，如有版权问题请告知本网或上传者本人，本网会及时给予答复。

报告错误 1.下载无效　 2. 资料明显无价值　 3. 资料重复存在

评论：(共有0人发表评论)

更多>>

你还没有登录，无法发表评论，请首先