首页
最新动态 交流合作 科研项目 论文著作 精彩瞬间 招生招聘
  • 185. Strongly improving the mechanical properties for biomaterial poly(ε-caprolactone) plates through the embedding spherical polylactide particles of a low amount into the densely crosslinked matrix with enhanced interfacial interactions
  • 来源:王志刚教授,博士生导师,硕士生导师个人网站 2026-11-04
  • Poly(ε-caprolactone) (PCL) is considered as an ideal alternative to traditional petroleum-based plastics owing to its biodegradability, excellent flexibility and good processability. However, its practical application is limited by its low tensile strength and melting temperature. In this work, the polylactide (PLA) of a low amount of 5% in mass is employed as a reinforcing agent for PCL. Through a gamma-ray irradiation processing with the assistance of a trifunctional monomer, triallyl isocyanurate (TAIC), the obtained PCL/PLA blend plates exhibit strongly improved tensile yielding strength, reaching up to 25 MPa at the irradiation dose of 100 kGy, which is 2.5 times that for neat PCL (10 MPa). The gel content analysis, rheological measurement, dynamic mechanical analysis, scanning electron microscopy, wide-angle X-ray diffraction and small-angle X-ray scattering are taken to explore the reinforcing mechanisms. It is found that the dispersed PLA minor phase domains as spherical particles embedded in the irradiation-crosslinked PCL matrix with the improved interfacial compatibility and restricted phase mobility are mainly responsible for the strong improvement in the mechanical properties for the irradiated PCL/PLA 95/5 blends. This work provides an effective approach for the preparation of PCL plate materials with a well-balanced combination of tensile strength and toughness, which provides a reference for the mechanical enhancement of other soft biodegradable polymer systems.

    https://doi.org/10.1016/j.polymer.2026.130295




  • [来源:中国聚合物网]
  • 了解更多请进入: 王志刚教授,博士生导师,硕士生导师个人网站
相关新闻
  • · 188. Quantification of the effect of crystalline microfibrillar superstructures on the superior impact strength of neat polylactide sheets by controlling prestretching temperatures above the glass transition temperature
  • · 187. Bottlebrush cell-g-PBA-b-PMMA copolymer elastomers with disentangled short side chains to possess applicable mechanical properties
  • · 186. Supertough, ultrastrong and transparent bulk polylactide sheets prepared by rolling at ambient temperature
  • · 184. Tensile deformation above the glass transition temperature to construct a crystalline microfibrillar superstructure for achieving supertough, ultrastrong, and transparent neat polylactide

关于我们  |  联系我们  

网站:中国聚合物网

polymer.cn Copyright ©2017