首页
最新动态 交流合作 科研项目 论文著作 精彩瞬间 招生招聘
  • Collimating lens for light-emittin g-diode light source based on non-imaging optics
  • 来源:王丽莉研究员个人网站 2012-10-29
  • Collimating lens for light-emitting-diode (LED) light source is an essential device widely used in lighting engineering. Lens surfaces are calculated by geometrical optics and Non-imaging optics (NIO). This design progress does not rely on any software optimization and any complex iterative process. This method can be used for any type of light source not only Lambertian. The theoretical model is based on point source. But the practical LED source has a certain size. So in the simulation, LED chip whose size is 1mm*1mm is used to verify the feasibility of the model. The mean results show that lenses have very compact structure and good collimating performance. Efficiency is defined as the ratio of the flux in the illuminated plane to the flux from LED source without considering the lens material transmission. Just investigating the loss in the designed lens surfaces, the two types of lenses have high efficiencies more than 90% and 99%, respectively. Most lighting area (possessing 80% flux) radiuses are no more than 5m when illuminated plane is 200 m away from the light source.
  • [来源:中国聚合物网]
  • 了解更多请进入: 王丽莉研究员个人网站
相关新闻
  • · 环烯烃共聚物太赫兹透镜的设计、制备及特性分析
  • · 环烯烃共聚物多孔太赫兹纤维的设计与特性模拟
  • · A photocatalytic reactor derived from microstructured polymer optical fiber preform
  • · Design of optical element combining Fresnel lens with microlens array for uniform light-emitting diode lighting

关于我们  |  联系我们  

网站:中国聚合物网

polymer.cn Copyright ©2017