| |
Controlled Directional Water-Droplet Spreading on a High-Adhesion Surface
Controlled directional spreading of a droplet on a smart high-adhesion surface was made possible by simply controlling anodic oxidation. The wettability gradient of the surface was controlled from 0.14 to 3.388mm1 by adjusting the anodic oxidation conditions. When a water droplet made contact with the substrate, the droplet immediately spread in the direction of the wettability gradient but did n...
http://www.polymer.cn//ss/zhengyongmei/publicationsshow_7151.html |
| |
Stabilization of highly crosslinked ultra high molecular weight polyethylene with natural polyphenols
In the present work, dodecyl gallate (DG) and gallic acid (GA) were blended with UHMWPE and consolidated by compression moulding prior to e-beam irradiation. Stabilisation of highly crosslinked UHMWPE with these polyphenols was examined by tracing post-irradiation oxidation kinetics of UHMWPE at room temperature with Fourier transform infrared (FTIR) spectroscopy, in comparison to highly crosslink...
http://www.polymer.cn//ss/fujun/publicationsshow_7142.html |
| |
Modifying graphite oxide nanostructures in various media by high-energy irradiation
Chen, L.; Xu, Z.; Li, J.; Zhou, B.; Shan, M.; Li, Y.; Liu, L.; Li, B.; Niu, J., Modifying graphite oxide nanostructures in various media by high-energy irradiation. RSC Advances 2014, 4, 1025-1031.
http://www.polymer.cn//ss/xuzw/publicationsshow_6639.html |
| |
Metallic Nanoparticles with High Catalytic Properties Stabilized by Functional Polymer Microspheres and Microcapsules
This paper described the in-situ synthesis of the polymer microsphere-stabilized metallic nanocolloids via the reduction of HAuCl4 with NaBH4 as reductant and the mechanism for such stabilization.
http://www.polymer.cn//ss/yangxinlin/publicationsshow_6611.html |
| |
51. Hollow TiO2 Nanocages with Rubik-like Structure for High-Performance Photocatalysts
Mater. Lett., 2012, 89, 59-62.
http://www.polymer.cn//ss/ghjiang_cn/publicationsshow_6262.html |
| |
48. Superhydrophobic and high adhesive performance of functionalized graphene oxide films
Powder Technol., 2012, 230, 247-251.
http://www.polymer.cn//ss/ghjiang_cn/publicationsshow_6259.html |
| |
Bio-inspired high-performance and recyclable cross-linked polymers
Bio-inspired molecular design and synthesis of high-performance and recyclable cross-linked polymers is reported. Reversible cross-links between hard segments are incorporated into linear segmented polyurethane via Diels-Alder reaction between
maleimide pendant group and furan cross-linker. The materials form hierarchical structure and exhibit excellent properties with high stiffness, strength and...
http://www.polymer.cn//ss/sunpingchuan/publicationsshow_5984.html |
| |
A bioplastic with high strength constructed from cellulose hydrogels by changing aggregated structure
The direct use of cellulose to fabricate materials such as common plastics as synthetic polymers has hardly been investigated. In the present paper, bioplastics of a new class are constructed, for the first time, by hot-pressing cellulose hydrogel, and are different from common plastics in terms of their processability. The cellulose hydrogels were prepared from cellulose solution...
http://www.polymer.cn//ss/chengheiccas/publicationsshow_5577.html |
| |
ChemSusChem, 2013, 6,1376-1383, Towards high conductivity in anion-exchange membranes for alkaline fuel cells
Cover Picture
The cover shows an anion-exchange membrane for use in an alkaline fuel cell. Due to its unique structure it can act as an electrolyte and facilitate the transport of hydroxide ions, the mobility of which is usually by its low intrinsic conductivity. Binder et al. demonstrate in their manuscript on page 1376 how this structure can be obtained. The simple te...
http://www.polymer.cn//ss/ecomembrane/publicationsshow_5572.html |
| |
High-Performance Light-Emitting Diodes Encapsulated with Silica-Filled Epoxy Materials
Packaging materials have a great impact on the performance and reliability of light-emitting diodes (LEDs). A set of evaluation methods have been established to characterize the reliability of LED devices. No delamination or internal cracking between packaging materials and lead frames has been found for the encapsulated high performance LED devices after the package saturation with mo...
http://www.polymer.cn//ss/yuyingfeng/publicationsshow_5279.html |
| |