| |
(ACS Applied Materials & Interfaces) Local Controllable Laser Patterning of Polymers Induced by Graphene Material
Graphene has been successfully applied to the field of polymer laser patterning. As an efficient 1064 nm near-infrared (NIR) pulsed laser absorber, the graphene prepared by the mechanical exfoliation of only 0.005 wt% (50 ppm) endowed polymer materials with a very good performance of NIR pulsed laser patterning. Optical microscopy observed that the generated black patterns came from the local di...
http://www.polymer.cn//ss/zhoutaopoly/publicationsshow_10288.html |
| |
(ACS Applied Materials & Interfaces) Fabricating Metallic Circuit Patterns on Polymer Substrates through Laser and Selective Metallization
Nowadays, as the rapid development of portable electronics, wearable electronics, LEDs, microelectronics, and bio-electronics, the fabrication of metallic circuits onto polymer substrates with strong adhesion property is an ever-attracting challenge. In this study, the high resolution and well-defined metallic circuits was successfully prepared on the polymer surface via laser direct structuring...
http://www.polymer.cn//ss/zhoutaopoly/publicationsshow_10287.html |
| |
Tetra-carbazole substituted spiro[fluorene-9,9‘-xanthene]-based hole-transporting materials with high thermal stability and mobility for efficient OLEDs.
Two spiro[fluorene-9,9′-xanthene]-centered (SFX), tetra-carbazole substituted molecules 2,2′,7,7′-tetrakis(N, N-carbazole)-spiro(fluorene-9,9′-xanthene) (SFX-Cr1) and 2,3′,6,′7-tetrakis(N, N-carbazole)-spiro(fluorene-9,9′-xanthene) (SFX-Cr2) were synthesized, and the effect of the position of carbazole substitutes on bulk properties, such as photophysical and electrochemical properties, t...
http://www.polymer.cn//ss/luxiaoqing/publicationsshow_10202.html |
| |
[Materials Letters]Superior Cu2S/brass-mesh electrode in CdS quantum dot sensitized solar cells for dual-side illumination[2017]
Tingting Xu*, Pengli Wei, Xiaopeng Ren, Hu Liu, Lixin Chen, Wei Tian, Shengzhong (Frank) Liu* and Zhanhu Guo*.
“Superior Cu2S/brass-mesh electrode in CdS quantum dot sensitized solar cells for dual-side illumination”, Materials Letters, 2017, 195, 100-103.
http://www.polymer.cn//ss/tingtingxu/publicationsshow_10023.html |
| |
[Ceramic International] Synthesis of Borosilazane as UV-Curable Borazine-Type Single Source Precursor for SiBNC Ceramic Materials[2015]
Weiqi He, Lixin Chen*, Tingting Xu, Dan Wei, Yi Wang and Tingting Xu. “Synthesis of Borosilazane as UV-Curable Borazine-Type Single Source Precursor for SiBNC Ceramic Materials”, Ceramic International, 2015, 41, 10448-10455.
http://www.polymer.cn//ss/tingtingxu/publicationsshow_10000.html |
| |
[Phys. Chem. Chem. Phys.] Strategic Improvement of the Long-term Stability of Perovskite Materials and Perovskite Solar Cells[2016]
Tingting Xu*, Lixin Chen, Zhanhu Guo and Tingli Ma*. “Strategic Improvement of the Long-term Stability of Perovskite Materials and Perovskite Solar Cells”, Physical Chemistry Chemical Physics, (invited perspective, inside cover article). 2016, 18, 27026-27050.
http://www.polymer.cn//ss/tingtingxu/publicationsshow_9992.html |
| |
Experimental Research of Cement Mortar With Incorporated Lauric Acid/ Expanded Perlite Phase-Change Materials
The study presented in this paper focuses on an experimental investigation of cement
mortar incorporated lauric acid/expanded perlite phase-change materials (PCMs). The
physical properties of mortar incorporated shape-stable PCMs (SSPCMs) were evaluated.
The results showed that the addition of SSPCM increased the water absorption of mortar,
reduced the bulk density, and thermal condu...
http://www.polymer.cn//ss/jason/publicationsshow_9909.html |
| |
Crystalline Regio-/Stereoregular Glycine-Bearing Polymers from ROMP: Effect of Microstructures on Materials Performances.
Synthesis of amino acid or peptide-bearing polymers with controlled microstructures is still a long-going challenge in polymer chemistry in contrast to natural biopolymers with exactly controlled microstructures like proteins and DNA. Here, a series of new glycine-substituted cyclooctenes monomers were designed and synthesized. Ring-opening metathesis polymerizations (ROMP) of all 3-substituted ...
http://www.polymer.cn//ss/taoyouhua/publicationsshow_9884.html |
| |
Fluorescent Microporous Polyimides Based on Perylene and Triazine for Highly CO2-Selective Carbon Materials
Carbon dioxide (CO2) capture from point sources like coal-fired power plants is a potential solution for stabilizing atmospheric CO2 content to avoid global warming. Sorbents with high and reversible CO2 uptake, high CO2 selectivity, good chemical and thermal stability, and low cost are desired for the separation of CO2 from N2 in flue or natural gas. We report here, for the first time, on the syn...
http://www.polymer.cn//ss/liaoyaozu/publicationsshow_9777.html |
| |
[Materials] Encapsulation of Hydrophobic Phthalocyanine with Poly(N-isopropylacrylamide)/Lipid Composite Microspheres for Thermo-Responsive Release and Photodynamic Therapy
Phthalocyanine (Pc) is a type of promising sensitizer molecules for photodynamic therapy (PDT), but its hydrophobicity substantially prevents its applications. In this study, we efficiently encapsulate Pc into poly(N-isopropylacrylamide) (pNIPAM) microgel particles, without or with lipid decoration (i.e., Pc@pNIPAM or Pc@pNIPAM/lipid), to improve its water solubility and prevent aggregation in a...
http://www.polymer.cn//ss/gchen/publicationsshow_9737.html |
| |
|
|