| |
Study on the End-point Control of Holding Phase during Injection Molding
关键字：Injection molding; End-point control; Holding phase; Cavity temperature
While the transfer from filling to packing is particularly crucial duringinjection molding, the transfers from packing to holding and holding to screwrecovery also significantly affect part quality. In this study, the control of the&nb...
http://www.polymer.cn/research/dis_info11188 |
| |
3D finite element simulation of transient temperature field for rapid electrical heating cycle injection mold
关键字：Thermal analysis; rapid heating cycle molding; 3D FEM simulation
Rapid electrical heating cycle injection molding technology can be used toproduce polymer parts with no weld mark, flow mark and other surface defects on theparts surface. Recently, it has been gradually found wide use in pla...
http://www.polymer.cn/research/dis_info11186 |
| |
Highly efficient inverted top-emitting organic light-emitting diodes using lithium oxide as the electron injection layer
关键字：organic light-emitting diodes
The effect of lithium oxide (Li2O)1 as the electron injection layer (EIL) on performance of invertedtop-emitting organic light-emitting diodes (ITOLEDs) is investigated. Inserting Li2O between Al andAlq3 leads to an improved electron inject...
http://www.polymer.cn/research/dis_info8986 |
| |
crystalline morphology of isotactic polypropylene (ipp) in injection molded poly(ethylene terephthalate) (pet)/ipp microfibrillar blends
关键字：Injection; β-form crystal; shish-kebab structure
injection molding is one of the most widely employed methods for manufacturing polymeric products. nowadays, apart from the academic interest in understanding mechanism leading to different morphologies in an injection molded polymer, the&n...
http://www.polymer.cn/research/dis_info5395 |
| |
VISUAL COMPUTER-BASED SIMULATION OF THE PENETRATION LENGTH OF THE CORE MELT IN SANDWICH INJECTION
关键字：sandwich injection; computer-based simulation; penetration length of the core melt
On the chance of understanding the melt flow behavior and the mechanism of sandwich injection molding, we made dynamic simulation researches on sandwich injection molding process by employing the co-injection module in the software&nbs...
http://www.polymer.cn/research/dis_info2432 |
| |
3D finite element simulation of transient temperature field for rapid electrical heating cycle injection mold
关键字：Thermal analysis; rapid heating cycle molding; 3D
http://www.polymer.cn/Industry/industry2641.html |
| |
Numerical Simulation of Temperature Field in Barrel of Injection Molding Machine during Induction Heating Process Based on ANSYS Software
关键字：injection molding machine; induction heating; ANSY
http://www.polymer.cn/Industry/industry2639.html |
| |
Effect of Pre-process Drying of Cellulose on the Properties of Cellulose Fiber Reinforced Poly (lactic acid) Biocomposites
关键字： Injection molding, Poly (lactic acid) , Biocomposite, Cellulose, Moisture content
In the last few decades due to growing enwronmental friendly consciousness9 renewable resource based and biodegradable polymers gain more and more attention. One of the most promising polymers of the biopolymer family is&n...
http://www.polymer.cn/research/sy_info15214 |
| |
注射成型动态内应力的可视化实验研究
关键字：residual stress, birefringence, visualization of injection
透明注塑件因其优良的光学性能而得到了越来越广泛的应用，但是残余应力的存在严重影响了它的使用性能，特别是机械性能和光学性能，其中流动残余应力是影响这些性能的关键因素，但目前对残余应力的产生、发展及相互作用仍未完全明确，特别是对流动残余应力的研究更是缺乏。
http://www.polymer.cn/research/dis_info14857 |
| |
Mechanical Property and Fracture Characteristics of Glass and Jute Fiber Reinforced POlypropylene Hybrid Composites
关键字：Green degree,Acoustic emission technology,Fracture behabior,injection molding,short fiber
Due to the increasing high concerns on the sustainability issues represented by the environment and resource protection, petro-based products are facing to be replaced by natural or recyclable materials.
http://www.polymer.cn/research/dis_info11264 |
| |