| |
The Interfacial Engineering for the Fabrication of EpoxyMicrofluidic-photonic-integrated Devices on Glass Substrates
关键字：EpoxyMicrofluidic-photonic-integrated Devices
Fabricating epoxy SU-8-based microfluidic and photonic devices on glass substrates, such as pyrex wafers, has proven to be very difficult. The reason is that it is hard to completely remove residual material between patterned stru...
http://www.polymer.cn/research/dis_info9061 |
| |
Effect of filler morphology on mechanical and tribological performances of polyimide composites
关键字：polyimide, composite, tribology, morphology, glass fiber and bead
Different shape and size rigid glass fillers were chosen to modify thermoplastic polyimide (TPI) and its mechanical characters were measured.
http://www.polymer.cn/research/dis_info5654 |
| |
PREPARATION OF POLYIMIDE/SILICA NANOCOMPOSITE MATERIALS FROM WATER GLASS
关键字：PREPARATION,POLYIMIDE,SILICA,NANOCOMPOSITE,MATERIALS,FROM,WATER,GLASS,
Polyimide/silica nanocomposite films were prepared via a novel sol-gel route using silicic acid oligomer (SAO) as silane precursor., and polyamic acid (PAA) prepared from pyromellitic dianhydride (PMDA) and 4, 4’-oxydianiline (ODA) in&nbs...
http://www.polymer.cn/research/dis_info3291 |
| |
Study on insitu polymerization ABS /Glass fiber composites
关键字：insitu polymerization, long fiber, composites, ABS, impregnation
Long glass fiber reinforced acrilonitrile-butadiene-styrene copolymer(ABS) composites produced byinsitu polymerization was introduced in this paper. The polymerization occurred after the glass fiberwas fully impregnated by low viscosity solution of polybu...
http://www.polymer.cn/research/dis_info1515 |
| |
Research on Continuous Glass Fibre Reinforced Acrylonitrile-Butadiene-Styrene/Poly (vinyl chloride) Blends
关键字：Acrylonitrile-Butadiene-Styrene/Poly,Blends
Lately, the use of fibre reinforced thermoplastic (FRTP) has increased due to its better mouldability compared to thermosetting FRP material. ABS/PVC blend was widely used due to relatively good mechanical properties and lower cost.&nb...
http://www.polymer.cn/research/dis_info1188 |
| |
Mechanical Property and Fracture Characteristics of Glass and Jute Fiber Reinforced POlypropylene Hybrid Composites
关键字：Green degree,Acoustic emission technology,Fracture
http://www.polymer.cn/Industry/industry2723.html |
| |
DynamlCs of the Liposomes Formation Based on Glass-Base Nanopores
关键字：nanopore , liposome . scanning electron microscopy , electrochemistry , dynamics
Nanopore technology as such an emerging research area attracts most attentions of scientists and chemists recently. These nanopores are successfully used as sensors to monitor ion currents and forces via different electro...
http://www.polymer.cn/research/sy_info16067 |
| |
Processing and Mechanical Characterization of Glass Fiber Reinforcements Using Nano Particles
关键字：VARTM, Graphene oxide, Nanocomposites
Recent advancements in nano reinforced materials have allowed enhancement and tailoring of the mechanical properties of resulting composites. The addition of nano particles to the polymer matrix has been shown to produce&...
http://www.polymer.cn/research/sy_info15143 |
| |
Design of Multifunctional Interphases in Composites
关键字：Carbon nanotubes, Glass fibre, Multifunctional interphase, Sensor,Electromechanical switch
Nanoscale materials have been employed into interphase of composites in order to implement multiple functions, such as mechanical, electrical, hydrothermal and chemical. Multi-walled carbon nanotubes (CNTs) were ...
http://www.polymer.cn/research/sy_info15113 |
| |
DynamlCs of the Liposomes Formation Based on Glass-Base Nanopores
关键字：nanopore , liposome . scanning electron microscopy , electrochemistry , dynamics
Nanopore technology as such an emerging research area attracts most attentions of scientists and chemists recently. These nanopores are successfully used as sensors to monitor ion currents and forces via different electro...
http://www.polymer.cn/research/dis_info17757 |
| |