Links
Contact Info.
  • Address:天津市西青区宾水西道399号天津工业大学材料科学与工程学院
  • Zip:300387
  • Tel:022-8395-5357
  • Fax:
  • Email:chenyingbo@tiangong.edu.cn
Current Location :> Home > Publications > Text
Fabrication of Polyamide/Poly(vinylidene fluoride) Composite Hollow Fiber Membranes with an Outer Selective Layer for Effective Separation of Dyes and Salts
writer:huanfeng Wang, Yingbo Chen*, Xiaoyu Hu, Xianshe Feng
keywords:Composite hollow fiberLoose nanofiltrationOuter-selective layerIn situ IP on fibersDye/salt separation
source:期刊
specific source:Desalination Volume 503, 1 May 2021, 114957
Issue time:2021年

AbstractA polyamide/poly(vinylidene fluoride) composite hollow fiber membrane (HFM) was designed by in situ interfacial polymerization (IP) during the fiber spinning process. Using a piperazine aqueous solution as the bore fluid and a dual-bath coagulation, the PA outer layer was formed via IP of the PIP in the bore fluid and TMC in the second reactive bath during phase inversion process. Chemical structure, membrane morphology and surface property were characterized by using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscope (XPS), scanning electron microscope (SEM), and zeta potential. The effects of several parameters involved in the membrane fabrication (e.g., piperazine concentration, bore fluid flow rate, residence time and heat treatment temperature) on the morphology and performance of resultant composite HFMs were investigated. The composite HFM showed a performance that is comparable favorably with conventional nanofiltration membranes in terms of showed water permeability (10.2 L/m2·h·bar), high rejection to dyes (i.e., 100% for CR and EBT, 99.99% for RhB and MB, 98.3% for MO) and low salt rejections (NaCl 6.2%). Moreover, the newly developed composite HFM showed good stability and flux recovery with simple water rinsing for treatment of simulated textile wastewater. This work is expected to provide a new approach to designing composite HFMs for the treatment and reuse of textile wastewater.

Highlights

?The outer-selective PA/PVDF composite HFM was designed by in situ IP during the fiber spinning process.

?Fabrication parameters on morphology and performance of the composite HFMs were investigated.

?High separation factors of dyes/salts (9780 for MB/NaCl) were reached.

?The composite HFMs have high flux, excellent stability and antifouling property.