相关链接
联系方式
  • 通信地址:重庆市北碚区天生路2号
  • 邮编:400715
  • 电话:18580254939
  • 传真:
  • Email:jbzeng@swu.edu.cn
当前位置:> 首页 > 最新动态 > 正文
石墨烯增强聚己内酯的研究成果发表在RSC Advances上

TitlePoly(sodium 4-styrenesulfonate) modified graphene for reinforced biodegradable poly(ε-caprolactone) nanocomposites


Abstract:Homogeneous and stable water dispersion of graphene nanosheet (GNS) was prepared through a non-covalent functionalization technique by ultrasonic processing of GNS in the presence of poly(sodium 4-styrenesulfonate) (PSS) as the modifier. The dispersion was then used to compound with poly(ε-caprolactone) (PCL) through solution coagulation to fabricate PCL/GNS nanocomposites. Scanning and transmission electron microscopes observations indicated that PSS modified GNS dispersed uniformly in and showed strong interfacial adhesion with the PCL matrix when the loading of GNS was not more than 0.5 wt%. While when the loading of GNS increased to 1.0 wt%, aggregation morphology of GNS in PCL matrix was detected. The crystallization temperature of PCL, as investigated by differential scanning calorimeter, increased apparently by incorporation of PSS modified GNS. Investigation on isothermal crystallization kinetics of neat PCL and its composites indicated that the crystallization of PCL was accelerated considerably. Addition of only 0.05 wt% GNS caused a 5.8 times improvement in crystallization rate compared to neat PCL. The crystallization mechanism almost kept unchanged. The improvement in crystallization rate was ascribed to the enhanced nucleation density by incorporation of PSS modified GNS, as evidenced by polarizing optical microscope (POM). Tensile tests manifested that both the tensile strength and the Young’s modulus of PCL were reinforced and increased gradually with increasing GNS loading within 0.5 wt%, meanwhile the elongation at break did not reduced but increased slightly. While when the loading of GNS increased to 1.0 wt%, the tensile strength and elongation at break reduced considerable due to the aggregation of GNS with increasing loadings. Dynamic mechanical analysis indicated that the storage modulus of PCL was reinforced in the full temperature range by incorporation of PSS modified GNS.


Hyperlink:

http://pubs.rsc.org/en/content/articlelanding/2015/ra/c5ra15252f#!divAbstract