作者：Xueyao Liu, Wendong Liu, and Bai Yang.
关键字：none
论文来源：期刊
具体来源：J. Mater. Chem. C
发表时间：2019年

The optical performance of two dimensional (2D) metallic nanoring arrays is inevitably a?ected by their

substrate. This problem can be solved by using three dimensional (3D) nanorings, whose height is larger.

However, most reported 3D-metallic nanoring arrays were prepared through focused ion beam

lithography, which is high cost and low e?ciency. Herein, we provided a new approach to fabricate

highly ordered 3D-silver nanoring arrays (3D-AgNRAs) over a large area through multistep colloidal

lithography combined with metal deposition. The specific structure of the 3D-AgNRAs could be facilely

tuned by modulating the etching conditions. After gradual optimization of the 3D-AgNRAs’ structural

parameters with respect to their optical and sensing performance, the optimized 3D-AgNRAs’ structural

features were finally settled to be 1 mm period, 200 nm nanoring height, 300 nm silver layer thickness,

830 nm outer diameter, and 428 nm inner diameter. The optimized 3D-AgNRAs achieved high

refractometric sensitivity of 1105.8 nm per RIU and relative sensitivity of 50.2% per RIU. Ultimately, the

optimized 3D-AgNRAs were employed as an immunoassay substrate to prove their label-free biosensing

potential in the future.