Nucleation Effect of Thermotropic Liquid Crystalline Polymer on the Crystallization of Poly(epsilon-caprolactone)
作者：Wu, Defeng，Zhang, Yisheng，Zhang, Ming，Gao, Minge
关键字：none
论文来源：期刊
具体来源：Polymers and Polymer Composites
发表时间：2013年
Poly(ε-caprolactone) (PCL) has attracted much attention in recent years due to its good biodegradability
and biocompatibility. As a semicrystalline polymer, the fi nal properties of PCL strongly depend on its bulk
crystallization level. However, PCL shows a lower crystallization temperature and rate than other aliphatic
polyesters, which restricts its range of applications. To improve the crystallization is hence a key problem to
enhance the performance of PCL materials. In this work, a thermotropic liquid crystalline polymer (TLCP) was
used as a nucleating agent to improve the crystallization of PCL. The PCL/TLCP blend with the maximum
TLCP content of 10 wt.% was prepared by melt mixing. The nonisothermal crystallization behaviour of the PCL
matrix was studied using differential scanning calorimetry (DSC) and polarized optical microscopy (POM), and
the crystallization kinetics was then further analysed by methods including the Avrami, Ozawa, Mo, Ziabicki,
Lauritzen-Hoffman and Kissinger models. The results showed that the presence of the solid TLCP particles could
enhance crystallization temperature of the PCL matrix evidently at very small content levels (1 wt.%). Although
the mobility of the PCL chain segments decreased with increasing TLCP content, heterogeneous nucleation by
TLCP particles always played a dominant role in the overall crystallization. Therefore the blends showed higher
crystallization rates and ability than those of pure PCL. The kinetic analysis and the data obtained in this work
could be useful to optimize the processing conditions and to improve the crystallization of PCL.