writer：Xiang Shen, Yiping Zhao, Xia Feng, Qiang Zhang, Li Chen
keywords：Hollow Fiber Membrane
source：期刊
specific source：Polymer Engineering and Science
Issue time：2013年
  This article describes preparation of temperature-sensitive poly(vinylidene fluoride) hollow fiber membranes using the dry-wet spinning technique and investigates effects of air gap length on the structures and performances. In spinning these hollow fibers, N,N-dimethyl formamide and poly(ethylene glycol) (10,000) were used as the solvent and pore-forming agent, respectively. The prepared fiber membranes were characterized by scanning electron microscopy, pore size measurement, filtration experiments of pure water flux, and solutes with different molecular weights. The fiber membranes exhibit a quite asymmetric structures consisting of double skin layers situated on the fiber walls, two finger-like layers near skin layers as well as macrovoids and sponge-like structures at the center of the fiber cross-sections. Remarkable changes of pure water flux and retention of solute are observed around 328C, indicating an excellent temperature-sensitive permeability. As the air gap length increases, the pore size of fiber membrane decreases, which results in decrease of pure water flux and allows small molecules to permeate through the fiber membrane.