| |
A MODIFIED RUBBER LATEX/CLAY NANO-COMPOUNDING TECHNIQUE
关键字：MODIFIED,RUBBER,LATEX,CLAY,NANO,COMPOUNDING,TECHNIQUE,
A nano-compounding technique called latex/clay layer interpenetrating technique has been reported as an economical and simple method to prepare rubber/clay nanocomposites.In order to optimize the characteristics of rubber products containing the ...
http://www.polymer.cn/research/dis_info3034 |
| |
NATURAL RUBBER/SILICA NANOCOMPOSITE REINFORCED WITH NANO SILICA
关键字：Natural rubber, nanocomposite, silica, latex compounding
Inorganic nano fillers have demonstrated great potential to enhance the properties of natural rubber. The present paper reports the successful development of a natural rubber nanocomposite reinforced with nano silica. Its dynamic mechanical...
http://www.polymer.cn/research/dis_info2533 |
| |
The Volatile Organic Substance Permeability of Nano- and Micro-Rubber Composites
关键字：The,Volatile,Organic,Substance,Permeability,Nano,Micro,Rubber,Composites,
Due to the statutory requirements for zero emission vehicle (ZEV) and for technical reasons, the automotive industry is increasingly interested in achieving extremely high permeation resistance in the case of fuel and fluid system ...
http://www.polymer.cn/research/dis_info2508 |
| |
Experimental Study on Property of Rubber Composites Filled With Carbon Nanotubes
关键字：carbon nanotubes; rubber; carbon black; thermal co
http://www.polymer.cn/Industry/industry2631.html |
| |
Thermal Conductivity and Mechanical Properties of Silicone Rubber Filled with Different Particle Sized SiC
关键字：silicone rubber; silicone carbide; surface treatme
http://www.polymer.cn/Industry/industry2615.html |
| |
Applying Scientific Methods to Develop the Next Generation of Aqueous Rubber to Metal Adhesives
关键字：aqueous rubber to metal bonding adhesive
http://www.polymer.cn/Industry/industry2555.html |
| |
21. Co-toughened Polystyrene by Submicrometer-Sized Core?Shell Rubber Particles and Micrometer-Sized Salami Rubber Particles
A series of submicrometer-sized polybutadiene (PB) rubber particles with different diameters ranging from 100 to 450 nm were prepared via an emulsion polymerization. Subsequently, core.shell polybutadiene-graf t-polystyrene (PB-g-PS) particles were synthesized using a redox initiator system (cumene hydroperoxide and ferrous sulfate) by an emulsion grafting polymerization...
http://www.polymer.cnt//ss/ghgao/publicationsshow_11902.html |
| |
Fabrication and mechanical properties of natural rubber/waste ground rubber powders blends via a mechano-chemical method
In this paper, the rubber blends of natural rubber (NR) with waste ground rubber powders (WGRPs) have been successfully prepared by mechano-chemical activation method and influences of the amounts of WGRPs on the mechanical properties of have been systematically investigated. The results indicated that the mechano-chemical treatment helped for releasing the active agents of WGRPs and formatting ho...
http://www.polymer.cnt//ss/zhangming/publicationsshow_10565.html |
| |
Influences of particle sizes on properties of natural rubber/waste ground rubber powders blends
In this paper, the blends of natural rubber with waste ground rubber powders have been prepared by mechano-chemical activation method. The influences of particle sizes on both processing performances and mechanical properties have been investigated. The results indicated that: the blends with waste ground rubber powders of smaller particle sizes approached to higher surface tensile and easily mech...
http://www.polymer.cnt//ss/zhangming/publicationsshow_10564.html |
| |
Crosslink induced phase separation behaviors of acrylic rubber/epoxy blends
Epoxy resins are one of the most widely used classes of the thermosetting polymers. However, thesepolymers are very brittle, which constrains their end-use applications, so great effort have been devoted totoughen epoxy resins by ...
http://www.polymer.cn/research/sy_info14767 |
| |