| |
Study on rheological behavior and morphology evolution of polymeric materials in the process of micro-injection molding
Micro-injection molding is one of the most important methods to produce polymeric material micro-parts. Itis not simply a scaling down of the conventional injection molding, because the rheological behavior andmorphology evolution of polyme...
http://www.polymer.cn/research/dis_info16901 |
| |
The Effects of the Injection Parameters on Flow Length in Molding of the Pa 6 Reinforced Glass Fibre
关键字：Glass Fibre
It is very important to know flow properties of plastics when the mold is designing for the thermoplastics. Flow length of the plastic in the mold gives the information about the flow properties of molten plastic.
http://www.polymer.cn/research/dis_info9092 |
| |
Direct Formation of Nanohybrid Shish-kebab in The Injection Molded Bar of Polyethylene/Multi-walled CarbonNanotubes Composite
关键字：CNTs
The formation of nanohybrid shish-kebab (NHSK) superstructure, in which fibrillous carbon nanotubes (CNTs) act as shish while polymer lamellae as kebab, is a novel way to bond polymer and CNTs together and was first observed ...
http://www.polymer.cn/research/dis_info9078 |
| |
Controlling Electron and Hole Injection in Ambipolar Organic Field-Effect Transistors by Self-Assembled Monolayers
关键字：Organic Field-Effect Transistors
Controlling contact resistance in organic field effect transistors is one of the major hurdles to achievetransistor scaling and dimensional reduction. In particular in the context of ambipolar and/orlight-emitting transistors it is a diffic...
http://www.polymer.cn/research/dis_info8932 |
| |
Modification of AlOx surfaces with Self-Assembled Monolayers for Electron Injection in Conjugated Polymers
关键字：Self-Assembled Monolayers
This talk looks at the energetics of the electron-injection side of a polymer film. Electron injectioncontacts in standard polymer light emitting diodes are generally made of low work function (WF) metals,e.g. Ca or Al, evaporated...
http://www.polymer.cn/research/dis_info8886 |
| |
Injection molding of highly porous and interconnected biodegradable polymer matrices for tissue engineering scaffolds
A novel method has been developed for the mass production of complex, biodegradable polymer scaffolds featuring high porosity and interconnectivity without the use of organic solvents. The idea is to capitalize the synergy by comb...
http://www.polymer.cn/research/dis_info8329 |
| |
Effect of organoclay and preparation methods on the mechanical properties of microcellular injection molded polyamide 6-clay nanocomposites
Polyamide 6 (PA6)/MMT nanocomposites prepared by in-situ polymerization and melt compounding methods were used in this study. The organoclay Polyamide 6 nanocomposites were then injection molded by conventional and microcellular methods. Carbon&...
http://www.polymer.cn/research/dis_info8304 |
| |
NUMERICAL CALCULATION ABOUT INTERNAL STRESSES OF INJECTION MOLDED CRYSTALLINE POLYMERS
关键字：Injection; Crystallization; Internal stress
This article is presented to simulate the development of the internal stresses of injection molded crystalline polymers using a new mechanical model.
http://www.polymer.cn/research/dis_info5522 |
| |
COMPUTER-BASED SIMULATION OF THE FLOW BEHAVIOR OF CORE MELT IN SANDWICH INJECTION
关键字：Sandwich injection, penetration length of the core melt, breakthrough phenomen
The sandwich injection molding technique can be used in wide ranges of engineering applications. On the chance of understanding the melt flow behavior and the mechanism of sandwich injection molding, we made dynamic simulation res...
http://www.polymer.cn/research/dis_info2431 |
| |
Application of Moldflow in Injection Mold Design for the Panel of Air Conditioner
关键字：Injection molding, CAE, Moldflow, Air Conditioner
Traditional experience’s design method would risk the failure of mold design. This paper simulated injection molding process for the panel of air conditioner using CAE software called Moldflow / Mpi 5.1. The influence of gate&nbs...
http://www.polymer.cn/research/dis_info2430 |
| |