| |
Skin and β-crystals Development in Injection-molded iPP Along the Flow Direction
β-crystals
http://www.polymer.cnt//ss/zhengguoqiang/publicationsshow_3442.html |
| |
Gas-Assisted Injection Molded Polypropylene: the Skin-Core Structure
gas-assisted injection molding
http://www.polymer.cnt//ss/zhengguoqiang/publicationsshow_3439.html |
| |
Flow-induced Fiber Orientation in Gas-assisted Injection Molded Part
gas-assisted injection molding
http://www.polymer.cnt//ss/zhengguoqiang/publicationsshow_3437.html |
| |
Preparation and Characterization of Injection-Homo-Polypropylene Filled with Nano-CaCO3
Nano-CaCO3/homo-PP composites were prepared by melt-blending using twin-screw extruder. The results show that not only the impact property but also the bending modulus of the system have been evidently increased by adding nano-CaCO3. The nano-CaCO3 particles have been dispersed in the matrix in the nanometer scale which was investigated by means of transmission electron microscopy (TEM). The tough...
http://www.polymer.cnt//ss/wangwenyi/publicationsshow_2446.html |
| |
Organic electroluminescent device based on balanced carriers injection and transportation
作者: Wu F, Tian WJ, Zhang ZM, Ma YG, Li GW, Shen JC, Zhang LQ, Zhang BW, Cao Y
来源出版物: THIN SOLID FILMS 卷: 363 期: 1-2 页: 214-217 出版年: MAR 1 2000
摘要: The electronic structure of PDDP, T-3-OXD and Alq in for...
http://www.polymer.cnt//ss/tianwenjing/publicationsshow_880.html |
| |
Improving the Plastics Filling Balance in Multi-cavity Molds by 2-rate Injection
Improving the Plastics Filling Balance in Multi-cavity Molds by 2-rate Injection
http://www.polymer.cnt//ss/yangweimin/publicationsshow_97.html |
| |
Simulation of Fiber Orientation in Spiral Mold of Fiber Reinforced Injection Moldin
关键字：Fiber-reinforced thermoplastic, Injection molding, Fiber orientation, Archimedean spiral mold, Moldflow
For fiber-reinforced thermoplastic composite, mechanical property is directly decided by fiber orientation, which is affected by melt flowability. It is effective to test melt flowability using Archimedean spiral moldcl,2]. I...
http://www.polymer.cn/research/sy_info15218 |
| |
Simulation of Fiber Orientation in Spiral Mold of Fiber Reinforced Injection Molding
关键字：Fiber-reinforced thermoplastic,spiral mold, Moldflow Injection molding, Fiber orientation, Archimedean
For fiber-reinforced thermoplastic composite, mechanical property is directly decided by fiber orientation, which is affected by melt flowability. It is effective to test melt flowability by using Archimedean spiral moldcl,2]...
http://www.polymer.cn/research/sy_info15157 |
| |
Unexpected molecular weight dependence of shish kebab in water-assisted injection molded HDPE
关键字：molecular weight; shish kebab; water-assisted injection molding; X-ray techniques
As a part of continuous efforts to systematically understand the morphological development in water-assisted injection
molding, high density polyethylene with different molecular weights was molded in this study. Unexpectedly, it
was found that shish kebab with high lamellar and molecular orientations was formed in the sample with a lower
molecular weight (LMW) rather than in the higher one, es...
http://www.polymer.cn/research/sy_info14936 |
| |
Simulation of Fiber Orientation in Spiral Mold of Fiber Reinforced Injection Moldin
关键字：Fiber-reinforced thermoplastic, Injection molding, Fiber orientation, Archimedean spiral mold, Moldflow
For fiber-reinforced thermoplastic composite, mechanical property is directly decided by fiber orientation, which is affected by melt flowability. It is effective to test melt flowability using Archimedean spiral moldcl,2]. I...
http://www.polymer.cn/research/dis_info17365 |
| |