| |
A fast approach to the bem-based cooling analysis of injection mold
关键字： injection molding, cooling simulation, approximated sparsification method
Mold cooling system design in injection molding is critical from the viewpoint of productivity and quality of molded parts. Most of the mold cooling simulations are based on the boundary element (BEM). In this paper, a f...
http://www.polymer.cn/research/dis_info8261 |
| |
Numerical simulation investigating core deflection in injection molding
关键字： Core deflection, core deflectability, thin-walled injection molding
In the manufacturing of long hollow plastic parts with closed ends, like test tubes, unevenly advancing melt front around the cores results in core deflection, which becomes a pervasive problem especially when the parts are t...
http://www.polymer.cn/research/dis_info8253 |
| |
MOLD DESIGNED FOR INJECTION MOLDING OF PLASTIC PINLESS BUTT HINGE
关键字：MOLD,DESIGNED,FOR,INJECTION,MOLDING,PLASTIC,PINLESS,BUTT,HINGE,
This research concerned with mold design for injection molding of plastic pinless butt hinge having dimension of 100 mm x 75 mm x 6.25 mm based on the commercial metal butt hinge standard.
http://www.polymer.cn/research/dis_info5755 |
| |
Reducing the injection molding temperature of polypropylene by hyperbranched polymers
关键字：hyperbranched polymers, polypropylene, injection molding, mechanical properties
With the addition of a special hyperbranched polymers, the flowing properties of PP melt was improved and therefore the processing temperatures of PP were reduced significantly without changing the mechanical properties of PP injection...
http://www.polymer.cn/research/dis_info1996 |
| |
Research on Microchannel of PMMA Microfluidic Chip under Various Injection Molding Parameters
关键字：microfluidic chip, micro-injection mold, microchan
http://www.polymer.cn/Industry/industry2666.html |
| |
Enhanced orientation of the water-assisted injection molded iPP in the presence of nucleating agent
关键字：water-assisted injection moldign
The nucleated isotactic polypropylene (iPP) was
molded by water-assisted injection molding. The crystalline
morphology and orientation distribution were
studied. The results show that shear brought by melt
filling and pressurized water penetration can separately
induce the formation of oriented structures in
skin region (i.e., the region near mold cavity wall) and
the water channel region. ...
http://www.polymer.cn/research/sy_info14934 |
| |
The hierarchical structure of water-assisted injection molded HDPE: SAXS study
关键字：water-assisted injection molding; lamellar;
molding
(CIM) was also characterized. The result shows that
the WAIM part exhibits a distinct skin-core-water channel
structure which is different from the skin-core structure
for the CIM part. In the skin layer of both WAIM and
CIM parts, the shish-kebab structure was formed due to
the shear stress brought by melt filling, but the lamellar
orientation parameter of CIM part is smaller than ...
http://www.polymer.cn/research/sy_info14933 |
| |
Numerical simulation and experimental verification of the filling stage in injection molding
关键字：finte element,injection molding,ALE method
The linear low-density polyethylene melt is described by the modified Cross model, the dependence of melt viscosity on temperature incorporated with the Arrhenius
equation, and the Moldflow second-order model in this investigation. The mass, momentum conservation, and constitutive equations are discretized and solved by using the iterative stabilized fractional step algorithm along with the Crank...
http://www.polymer.cn/research/sy_info14679 |
| |
A fast approach to the bem-based cooling analysis of injection mold
关键字： injection molding, cooling simulation, approximated sparsification method
Mold cooling system design in injection molding is critical from the viewpoint of productivity and quality of molded parts. Most of the mold cooling simulations are based on the boundary element (BEM). In this paper, a f...
http://www.polymer.cn/research/ct_info809 |
| |
Numerical simulation investigating core deflection in injection molding
关键字： Core deflection, core deflectability, thin-walled injection molding
In the manufacturing of long hollow plastic parts with closed ends, like test tubes, unevenly advancing melt front around the cores results in core deflection, which becomes a pervasive problem especially when the parts are t...
http://www.polymer.cn/research/ct_info804 |
| |
|