| |
FEA Structure of Six-wing Synchronous Varying Clearance Rotor in Mixing Process
关键字：FEA; synchronous rotor; mixing process
The structure of the six-wing synchronous varying clearance rotor is specialand complex. And the forces acting on the rotors are complex, too. So, it is hard to usethe traditional way to analyze these forces. Now, the si...
http://www.polymer.cn/research/dis_info11183 |
| |
Impact of Process Parameters on the Dynamical Co-Coagulationof Cellulose Xanthate in Rubber Latex
关键字：Cellulose Xanthate
Taking into consideration that the abundant part of reinforcing fillers used in the rubber industry worldwide is oil based and/or produced on the basis of high energy consumption processes one urgent demand is to find strateg...
http://www.polymer.cn/research/dis_info9310 |
| |
Study of a Contact Line Dynamics in the Adhesion Process between Rubber Particle and Solid Substrate
关键字：Rubber
To study the interface between the rubbers and the solids,we chose the model of the adhesion between the rubberparticle and the solid substrate. There are some advantagesof this system to study this geometry. One is that ...
http://www.polymer.cn/research/dis_info9237 |
| |
Process Induced Residual Stress and Deformation in a Ring-Stiffened Composite Launching Tube
关键字：filament winding.
Composite materials are being used to fabricate launching tubes for strategic missiles due to their excellent specific strength and stiffness over traditional metal materials. The favoured method of manufacture is filament winding. Dependin...
http://www.polymer.cn/research/dis_info9126 |
| |
The Properties of NR Vulcanizate Filled with Silica-GelSynthesized from Rice Husk Ash via Sol-Gel Process
关键字：NR latex
It was found elsewhere that nanoparticles (OMMT) reinforced rubber would enhance both modulus and tensile properties without suffering the elongation at breakof the NR vulcanizate.
http://www.polymer.cn/research/dis_info9045 |
| |
WLEDs Based on the Composite of Host Polymer with Star-shaped Compounds as Red Emitter Fabricated by aSolution-Process
关键字：WLEDs
Organic light-emitting diodes (OLEDs) have attracted considerable interest because of their potential applications in flat-panel displays and in solid-state lighting in recent years.
http://www.polymer.cn/research/dis_info9024 |
| |
Dominant Process Which Influence Optical DNA Sequence Detection using Conjugated Polymers
关键字：DNA Sequence Detection
A fluorescence method for detecting a target nucleic acid sequence, in a strategy employing acombination of a labeled peptide nucleic acid (PNA-C*) probes and conjugated polymer (CCP)/surfactant system, in a simple, rapid, and sensitiv...
http://www.polymer.cn/research/dis_info8922 |
| |
Reactive Extrusion Process for the Imidization of SMA with Aniline: The Influence of Vapor-Liquid Equilibrium and Mass Transport
Imidization of poly(styrene-co-maleic anhydride) (SMA) with amines may improve some of its end-use properties. And the reactive extrusion is an economical and environment-benign process for the reaction. The objective of this work was ...
http://www.polymer.cn/research/dis_info8665 |
| |
Development of a Thermal Slumping Process for Solar Concentrator Manufacturing
关键字：Thermal slumping, solar concentrator, affordable manufacturing
Solar energy exploration (capture, conversion, and storage) has become a much-debated topic. As the world demand for energy continues to increase at an unprecedented pace, solar energy will eventually enter the consumer market. S...
http://www.polymer.cn/research/dis_info8248 |
| |
PREPARATION OF CORE-SHELL NANOPARTICLES BY EMULSION-AGGREGATION PROCESS
关键字：PREPARATION,CORE,SHELL,NANOPARTICLES,EMULSION,AGGREGATION,PROCESS,
The core-shell structures of polymer nano-particles have attracted great attention in imaging and electronic applications due to uniform chargeability and enhanced physical properties.
http://www.polymer.cn/research/dis_info5622 |
| |