作者：Bo Peng, Hongbin Hou, Fangchao Song, Linbo Wu*.
关键字：biodegradable polymers, poly(L-lactic acid)
论文来源：期刊
具体来源：Ind. Eng. Chem. Res. 2012, 51, 5190?5196
发表时间：2012年

To enhance the reaction rate of solid state polycondensation (SSP) of poly(L-lactic acid) (PLLA) and thus to
prepare high molecular weight PLLA by SSP in a short time, the effects of precrystallization as well as SSP temperature (Ts) on
the SSP of PLLA were investigated. It was found that precrystallization at low Tc (70 °C) and then SSP at step-raised Ts could
greatly favor the growth of the molecular weight of PLLA. After precrystallization at 70 °C for 60 min and then SSP at 150−160
°C for 20 h, the product’s weight average molecular weight (Mw) exceeds 200 000 g·mol−1 while its optical purity remained as
high as 90%. The prepolymer precrystallized at 70 °C for 60 min had smaller crystal size and looser packing of lamellae structure
than that at Tcmax (110 °C) and moderate crystallinity of 45%. Such crystal properties may result in enhanced concentration and
mobility of chain-end groups and improved diffusion of byproduct water in an amorphous area, so the SSP reaction is
accelerated. PLLA continues to crystallize during SSP. The crystallinity and melting temperature increase rapidly at the early
stage and slowly at the late stage, implying that the effect of precrystallization on the SSP rate is significant at the early stage, and
weakens gradually at the late stage.