主要论著：
1.Degradation kinetics and molecular structure development of hydroxyethyl cellulose under the solid state mechanochemical treatment, Rong Chen, Chuanbin Yi, Hong Wu, Shaoyun Guo, Carbohydrate Polymers 2010, Accepted for Publication.
2.Real-Time Ultrasonic Characterization of the Chain Orientation of High Density Polyethylene Melts during Processing, Congmei Lin, Shan Wang, Huimin Sun, Jiang Li, Shaoyun Guo, Polymer Engineering & Science 2009, Accepted for Publication.
3.Adhesion and Delamination Failure Mechanisms in Alternating Layered Polyamide and Polyethylene with Compatibilizer, Qin Du, Genjie Jiang, Jiang Li, Shaoyun Guo, Polymer Engineering & Science 2009, Accepted for Publication.
4.Mechanochemical preparation of a novel polymeric photostabilizer for PVC, Xiaofei Zhang, Tianbao Zhao, Hong Pi, Shaoyun Guo, Journal of Applied Polymer Science 2009, Accepted for Publication.
5.In-process Ultrasonic Measurements of Orientation and Disorientation Relaxation of High Density Polyethylene/Polyamide-6 Composites with compatibilizer, Congmei Lin, Huimin Sun, Shan Wang, Jian Huang, Jiang Li, Shaoyun Guo, Journal of Applied Polymer Science 2009, Accepted for Publication.
6.In situ fibrillation of polyamide 6 in isotactic polypropylene occurring in the laminating-multiplying die, Jiabin Shen, Ming Wang, Jiang Li and Shaoyun Guo, Polymer Advanced Technology 2009, Accepted for Publication.
7.Effect of a Tie Film on the Enhanced Interfacial Adhesion Between Polyethylene and Polyamide-6 in a Sequential Injection Molding, Genjie Jiang, Hong Wu, Bowen Yan, Shaoyun Guo, Polymer Engineering & Science 2009, Accepted for Publication.
8.Simulation of mechanical properties of multilayered propylene–ethylene copolymer/ethylene 1-octene copolymer composites by equivalent box model and its experimental verification, Jiabin Shen, Ming Wang, Jiang Li, Shaoyun Guo, Shuangxi Xu, Yuqing Zhang, Ting Li, Ming Wen, European Polymer Journal 2009, 45(11), 3269-3281.
9.Ultrasonic characterization of the crystallization behavior of poly(ethylene terephthalate), Lijuan Zhao, Zhigang Sun, Jacques Tatibouët, Shaoyun Guo, Journal of Applied Polymer Science 2009, 114(5), 2731-2739.
10.Ethylene-acrylic acid copolymer induced electrical conductivity improvements and dynamic rheological behavior changes of polypropylene/carbon black composites, Guangshun Chen, Bo Yang, Shaoyun Guo, Journal of Polymer Science Part B: Polymer Physics 2009, 47(18), 1762-1771.
11.Nylon 6 induced morphological developments and electrical conductivity improvements of polypropylene/carbon black composites, Guangshun Chen, Bo Yang, Shaoyun Guo, Journal of Applied Polymer Science 2009, 114(3), 1848-1855.
12.Formation of Hierarchically Structured Thin Films, Ming Wang, Jean E. Comrie, Yunpeng Bai, Ximin He, Shaoyun Guo, Wilhelm T. S. Huck, Advanced Functional Materials 2009, 19, 1-8.
13.Reinforcement of solid-melt interfaces for semicrystalline polymers in a sequential two-staged injection molding process, Genjie Jiang, Hong Wu, Bowen Yan, Shaoyun Guo, Jian Huang, Journal of Polymer Science Part B: Polymer Physics 2009, 47 (11), 1112-1124.
14.Structure and property of injection-molded polypropylene along the flow direction, Xiaofeng Yu, Hong Wu, Jiang Li, Shaoyun Guo, Jianhui Qiu, Polymer Engineering & Science 2009, 49(4), 703-712.
15.Improved processing behaviors and mechanical properties of polyolefin elastomer blends prepared by ultrasound-assisted extrusion, Genjie Jiang, Hong Wu, Tingting Xie, Shaoyun Guo, Journal of Applied Polymer Science 2009, 112(4), 2136-2142.
16.Solid State Mechano-chemical Grafting Copolymerization of Hydroxyethyl Cellulose With Acrylic Acid，Rong Chen, Chuanbin Yi, Hong Wu, Shaoyun Guo, Journal of Applied Polymer Science 2009，112(6), 3537-3542.
17.Kinetics of thermo-oxidative degradation of zinc borate/microcapsulated red phosphorus with magnesium hydroxide in flame retarded polypropylene composites, Xiaolang Chen, Jie Yu, Zhu Luo, Shuchun Hu, Zuowan Zhou, Shaoyun Guo and Shengjun Lu, Journal of Polymer Research 2009, 16, 745-753.
18.Effects of zinc borate and microcapsulated red phosphorus on mechanical properties and flame retardancy of polypropylene/magnesium hydroxide composites, Chen Xiaolang, Yu Jie, He Min, Guo Shaoyun, Luo Zhu, Lu Shengjun, Journal of Polymer Research 2009, 16(4), 357-362.
19.Effects of Magnesium Hydroxide and Its Surface Modification on Crystallization and Rheological Behaviors of Polypropylene, Xiaolang Chen, Jie Yu, Shaoyun Guo, Zhu Luo, Min He, Polymer Composites 2009, 30(7), 941-947.
20.Surface modification of magnesium hydroxide and its application in flame retardant polypropylene composites, Xiaolang Chen, Jie Yu, Shaoyun Guo, Shengjun Lu, Zhu Luo and Min He, Journal of Materials Science 2009, 44(5), 1324–1332.
21.Structure and properties of electrically conducting composites consisting of alternating layers of pure polypropylene and polypropylene with a carbon black filler，Shuangxi Xu, Ming Wen, Jiang Li, Shaoyun Guo, Ming Wang, Qin Du, Jiabin Shen, Yuqing Zhang, Songling Jiang, Polymer 2008, 49(22), 4861-4870.
22.Solid mechanochemical preparation of core-shell SiO2 particles and their improvement on the mechanical properties of PVC composites, Xiong Ying, Chen Guangshun, Guo Shaoyun, Journal of Polymer Science Part B: Polymer Physics 2008, 46(10), 938-948.
23.Flammability and thermal oxidative degradation kinetics of magnesium hydroxide and expandable graphite flame retarded polypropylene composites, Chen Xiaolang, Yu Jie, Guo Shaoyun, Luo Zhu, He Min, Journal of Macromolecular Science, Part A: Pure and Applied Chemistry 2008, 45(9), 712-720.
24.Maleic Anhydride/Styrene Melt Grafting and Crosslinking onto Ethylene-Octene Copolymer, Xiaolang Chen, Hong Wu, Jie Yu, Shaoyun Guo, Zhu Luo, Polymer Engineering & Science, 2008, 48(12), 2289-2296.
25.Synergistic effects of expandable graphite with magnesium hydroxide on the flame retardancy and thermal properties of polypropylene, Xiaolang Chen, Hong Wu, Zhu Luo, Bo Yang, Shaoyun Guo, Jie Yu, Polymer Engineering & Science, 2007, 47, 1756-1760.
26.Effects of interfacial morphology on the welding strength of injection-molded polyamide, Jianhui Qiu, Atsushi Tsuboi, Kazuo Izumi, Hong Wu, Shaoyun Guo, Yudong Huang, Polymer Engineering & Science, 2007, 47, 2164-2171.
27.Ultrasound assisted development of structure and properties of polyamide 6/montmorillonite nanocomposites, Jiang Li, Lijuan Zhao, Shaoyun Guo, Journal of Macromolecular Science, Part B: Physics, 2007, 46(3), 423-439.
28.A Study on Compatibility and Properties of POE/PS/SEBS Ternary Blends，Genjie Jiang, Hong Wu, Shaoyun Guo, Journal of Macromolecular Science, Part B Physics, 2007, 46(3), 533-544.
29.Effect of Interfacial Structure on Crystallization Behavior of Polypropylene-Polyolefin Elastomer-Barium Sulfate Ternary Composites, Hong Wu, Xiaolan Sun, Zhen Li, Shaoyun Guo, Journal of Macromolecular Science，Part B: Physics, 2007, 46, 329–339.
30.Thermal oxidative degradation kinetics of PP and PP/Mg (OH)2 flame-retardant composites， Xiaolang Chen, Jie Yu, Shaoyun Guo, Journal of Applied Polymer Science, 2007, 103(3), 1978-1984.
31.Development of morphology and properties of injection-molded bars of HDPE/PA6 blends along flow direction, Jiang Li, Xiaofeng Yu, Shaoyun Guo, Journal of Polymer Science Part B: Polymer Physics, 2007, 45(2), 184-195
32.A study on the morphology and mechanical properties of PVC/nano-SiO2 composites, Chen, Guangshun; Tian, Manhong; Guo, Shaoyun, Journal of Macromolecular Science, Part B: Physics, 2006, 45 B(5), 709-725(SCI: 081YB; EI: 063810118849)
33.Structure and properties of polypropylene composites filled with magnesium hydroxide, Xiaolang Chen, Jie Yu, Shaoyun Guo, Journal of Applied Polymer Science, 2006, 102(5), 4943-4951 （SCI: 099KQ;
34.Effect of ultrasonic oscillations on weld line strength of PS, PMMA, and their blends, Xiaofeng Yu, Chang Lu, Hong Wu, Shaoyun Guo, Journal of Applied Polymer Science, 2006, 102(3), 2990-2997(SCI: 090AV; EI: 064410207815)
35.The preparation of core-shell CaCO3 particles and its effect on mechanical property of PVC composites, Ying Xiong, Guangshun Chen, Shaoyun Guo, Journal of Applied Polymer Science, 2006, 102（2）, 1084-1091(SCI: 079VX;EI: 064110167511)
36.Effect of pentaerythritol and organic tin with calcium/zinc stearates on the stabilization of poly(vinyl chloride)，Ming Wang, Jiayou Xu, Hong Wu, Shaoyun Guo，Polymer Degradation and Stability, 2006, 91 (9), 2101-2109(SCI:062BB; EI: 06239924358)
37.The mechanism of ultrasonic improvement of weld line strength of injection molded polystyrene and polystyrene/polyethylene blend parts, Chang Lu, Xiaofeng Yu, Shaoyun Guo, Journal of Polymer Science Part B: Polymer Physics, 44(10), 2006, 1520-1530(SCI: 040IM; EI: 06229906546)
38.Ultrasonic oscillations induced morphology and property development of polypropylene/montmorillonite nanocomposites, Zhao Lijuan, Li Jiang, Guo Shaoyun, Du Qin, Polymer, 2006, 47(7), 2460-2469(SCI: 030JE; EI: 06129769742)
39.Effects of ultrasonic oscillation on processing behaviors of PS, EPDM, and PS/EPDM blend, Jiang Li, Shaoyun Guo, Mei Liang, Journal of Applied Polymer Science, 2006, 100(3), 1856-1863(SCI: 023TY; EI: 06179842190)
40.Studies on Rheological Behavior and Structure Development of High-Density Polyethylene in the Presence of Ultrasonic Oscillations During Extrusion，Yuntao Li, Guangshun Chen, Shaoyun Guo, and Huilin Li，Journal of Macromolecular Science, Part B: Physics, 45B(1), 39–52, 2006 (SCI: 001NY; EI: 06049659361)
41.Ultrasonic improvement of weld line strength of injection-molded polystyrene and polystyrene/polyethylene blend parts, Chang Lu, Xiaofeng Yu, Shaoyun Guo, Polymer Engineering & Science, 2005, 45(12), 1666-1672
42.In Situ Compatibilization of PS/EPDM Blends during Ultrasonic Extrusion，Jiang Li, Shaoyun Guo, Radek Sleza´k, Berenika Hausnerova，Macromolecular Chemistry and Physics 2005, 206, 2429–2439
43.Effects of ultrasonic oscillations on linear viscoelastic behaviors of metallocene-catalyzed linear low density polyethylene and its blends with low density polyethylene，Hong Wu, Shaoyun Guo, Zhen Li，Journal of Polymer Science Part B: Polymer Physics，2005,  43（21），3030-3043
44.Ultrasonic Preparation of Polymer/Layered Silicate Nanocomposites during Extrusion，Jiang Li, Lijuan Zhao and Shaoyun Guo，Polymer Bulletin， 2005，55（3），217 - 223
45.Effect of High Energy Vibromilling on Interfacial Interaction and Mechanical Properties of PVC/nano-CaCO3 composites, Manhong Tian, Guangshun Chen, Shaoyun Guo, Macromolecular Materials & Engineering, 2005, 290, 927-932
46.Molecular structure development of metallocene-catalyzed linear low density polyethylene under ultrasonic irradiation, Hong Wu, Shaoyun Guo, Zhen Li, Journal of Polymer Science Part B: Polymer Physics，2005, 43, 2121-2129
47.Linear viscoelastic properties of high-density polyethylene/polyamide-6 blends extruded in the presence of ultrasonic oscillations， Jiang Li, Mei Liang, Shaoyun Guo, Vanda Kuthanová, Berenika Hausnerová，Journal of Polymer Science Part B: Polymer Physics，2005, 43, 1260-1269
48.The kinetic studies of elimination of HCl during thermal decomposition of pvc in the presence of transition metal oxides, Hong Pi, Ying Xiong, Shaoyun Guo, Polymer-Plastics Technology and Engineering, 2005，44，275-288
49.Degradation kinetics of polystyrene and EPDM melts under ultrasonic irradiation，Li, Jiang; Guo, Shaoyun; Li, Xiaonan，Polymer Degradation and Stability, 2005, 89, 6-14
50.Effect of ultrasonic oscillations on the rheological behavior and morphology of illite-filled high-density polyethylene composites，Li, Yuntao; Chen, Guangshun; Guo, Shaoyun; Li, Huilin，Journal of Applied Polymer Science, 2005, 96, 379-384
51.Mechanochemical degradation kinetics of high-density polyethylene melt and its mechanism in the presence of ultrasonic irradiation, Yuntao Li, Jiang Li, Shaoyun Guo, Huilin Li, Ultrasonics Sonochemistry, 12，183-189，2005
52.A modified model predictions and experimental results of weld-line strength in injection molded PS/PMMA blends, Shaoyun Guo, A. Ait-Kadi, M. Bousmina, Polymer, 45, 2911-2920, 2004.
53.Effect of the Material of Construction of Die on Processing Behavior of Metallocene-Catalyzed Linear Low Density Polyethylene, Hong Wu, Shaoyun Guo, Guangshun Chen, Wei Chen, and Hongtao Wang, Polymer-Plastics Technology and Engineering, 43, 17-29, 2004.
54.Dynamic rheological properties of high-density polyethylene/polystyrene blends extruded in the presence of ultrasonic oscillations, Guangshun Chen, Shaoyun Guo, Yuntao Li, Journal of Applied Polymer Science, 92, 3153-3158, 2004